HB3YAQLucerne
CQV · Test equipment
CQV-SWR120
Digital power and SWR meter for 1.8–54 MHz, rated up to 120 W.
At a glance
All specifications ↓- Frequency range
- 1.8–54 MHz
- Charging connection
- USB-C, 5 V / 1 A
- Low voltage
- Warning below 3.4 V; shutdown below 3.35 V
- Dimensions
- 88 × 63 × 38 mm
- Power measurement range
- 0.5–120 W; source specifies up to 200 W in SSB mode
- Frequency range
- 1.8–54 MHz
- Maximum power
- 120 W
Inventory and assignments reflect my collection.
Product source ↗The CQV-SWR120 measures forward and reflected power and standing-wave ratio between a radio and antenna. Its colour display presents several readings simultaneously. A built-in battery supplies power and charges through USB-C.
The documented version covers 1.8 to 54 MHz. An adjustable SWR alarm, automatic transmit-triggered power-on and delayed shutdown support station use. Its displayed “antenna efficiency” is derived from electrical readings rather than independently measuring actual radiation efficiency.
Features & equipment
- Direct display of forward power, reflected power and SWR.
- Adjustable SWR alarm and shutdown delay.
- Automatic power-on when a transmit signal is detected.
- Low-voltage warning and USB-C charging.
Specifications
Measurement range & power
- Frequency range
- 1.8–54 MHz
- Power measurement range
- 0.5–120 W; source specifies up to 200 W in SSB mode
- SWR display
- 1–99.9
- Default SWR alarm
- > 2.0; adjustable
- Display
- 240 × 240 pixels, colour
- Battery
- 3.7 V / 1000 mAh, built in
- Charging connection
- USB-C, 5 V / 1 A
- Low voltage
- Warning below 3.4 V; shutdown below 3.35 V
- RF connectors
- UHF / SL16
- Dimensions
- 88 × 63 × 38 mm