HB3YAQLucerne
MiNi · Test equipment
1300
Portable antenna analyzer for assessing antenna matching.
At a glance
All specifications ↓- Frequency range
- 0.1–1300 MHz
- Measurement connections
- N connector; additional SMA VNA connector
- Dimensions
- 133 × 85 × 29 mm excluding projecting connectors
- Reference impedance
- 50 Ω
- SWR display range, single point
- 1.0–1999 as listed in product documentation
Inventory and assignments reflect my collection.
Product source ↗The MiNi 1300 is a portable antenna analyser covering 0.1 to 1300 MHz. It generates a small test signal to determine the matching and impedance of a connected antenna or cable. Results can be displayed numerically, as a frequency plot or on a Smith chart.
Besides SWR, the documented product family reports resistance, reactance, impedance magnitude and return loss. Single-point and sweep modes examine one frequency or a range, while TDR supports cable investigation. Operation uses a capacitive 4.3-inch touchscreen. Additional menus depend on firmware and the exact hardware version.
Features & equipment
- SWR, R, ±jX, |Z| and return loss.
- Single frequency, frequency sweep and TDR mode.
- Numerical, plot and Smith-chart displays.
- Open/short/load calibration and TF-card storage.
Specifications
Specifications of the documented MiNi 1300 version
- Frequency range
- 0.1–1300 MHz
- Reference impedance
- 50 Ω
- SWR display range, single point
- 1.0–1999 as listed in product documentation
- SWR display range, sweep
- 1.0–20.0
- Display
- 4.3″ TFT, 480 × 272 pixels
- Controls
- Capacitive touchscreen
- Measurement connections
- N connector; additional SMA VNA connector
- Power
- USB or internal battery
- Charging rating
- 5 V / maximum 1.5 A
- Storage
- TF / microSD
- Dimensions
- 133 × 85 × 29 mm excluding projecting connectors
- Weight
- 550 g
Model notes
The brand of the listed MiNi 1300 is not confirmed. Technical figures describe the linked version and do not establish installed firmware or individual calibration. A transmitter must not feed RF power into the analyser input.
Documents & sources
- MiNi 1300 – device manual (opens in a new tab)Original documentation
- HamGeek – documented MiNi 1300 version (opens in a new tab)Manufacturer