HB3YAQLucerne
IC-T10
Handhelds
Analog VHF/UHF dual-band handheld with straightforward controls and an IP67 enclosure.
At a glance
All specifications ↓- Modes
- FM / FM-N
- Frequency stability
- ±2.5 ppm
- Audio connectors
- Microphone 2.5 mm / 2.2 kΩ; speaker 3.5 mm / 8 Ω
- Operating voltage
- 7.2 V nominal; 10–16 V externally with AD-149H
- RF output
- 5 / 2.5 / 0.5 W
The IC-T10 is an analog VHF/UHF handheld for FM operation. Controls focus on frequency selection, memories and a Home button for returning to a preferred channel. Its internal speaker delivers a typical 1.5 W of audio to aid intelligibility in noisy surroundings.
The enclosure has IP67 dust and water protection. CTCSS and DTCS support tone signalling and squelch settings, while several scanning modes help monitor stored channels. A separate broadcast receiver provides FM radio listening. PC programming uses Icom CS-T10 software and the appropriate interface.
Features & equipment
- Home button for a preferred channel.
- Priority, programmed, memory, skip and tone scanning.
- CTCSS/DTCS encoding and decoding, 16 DTMF autodial memories.
- 208 memories with six-character names.
- External supply using the optional AD-149H adapter.
- Free CS-T10 programming software.
Specifications
Radio & audio
- TX, European version
- 144–146 / 430–440 MHz
- RX operating range
- 136–174 / 400–479 MHz
- FM broadcast
- 76–108 MHz
- Modes
- FM / FM-N
- RF output
- 5 / 2.5 / 0.5 W
- Memory
- 208 including 2 call channels and 6 scan edges
- Sensitivity
- < 0.18 µV at 12 dB SINAD
- Selectivity
- > 55 dB FM / > 50 dB FM-N
- Typical audio output
- Internal 1.5 W; external 450 mW; 8 Ω / 5% distortion
- Antenna
- SMA, 50 Ω
- Audio connectors
- Microphone 2.5 mm / 2.2 kΩ; speaker 3.5 mm / 8 Ω
Power & housing
- Operating voltage
- 7.2 V nominal; 10–16 V externally with AD-149H
- Current draw
- TX < 2.5 A; RX < 600 mA at maximum audio
- Battery life with BP-280
- Approx. 11 h VHF / 10 h UHF, TX/RX/standby 1:1:8, power saving on
- Dimensions, W × H × D
- 52.2 × 111.8 × 30.3 mm with BP-280, excluding projections
- Weight
- 278 g with BP-280 and antenna
- Ingress protection
- IP67
- Operating temperature
- −20 to +60 °C
- Frequency stability
- ±2.5 ppm
Documents & sources
- Icom IC-T10 – features and specifications (opens in a new tab)Manufacturer
- Icom – IC-T10 brochure (opens in a new tab)Original documentation
A closer look.
Hardware features describe the equipment. They do not establish personal transmitting privileges or current operation.
Open product source ↗
Reviewed 14 October 2026