← My radio equipment
UNDERSTAND THE EQUIPMENT

Compare equipment.

Choose two or three models from my collection. Compare their purpose and documented features side by side.

Reset

Duplicate models appear once. Missing data means ‘not documented’, not ‘not supported’. Power, weight and runtime figures apply only under their stated conditions.

Scroll the table sideways and down. Model names and feature labels stay visible.

Documented model specifications
FeatureAOR AR-DV10 ↗RemoveSDRplay RSP1B ↗Remove
Model
PurposePortable wideband receiver for analog and digital signals from 100 kHz to 1300 MHz.USB SDR receiver covering 1 kHz to 2 GHz for spectrum viewing and signal processing on a computer.
Frequency ranges

Receive range
100 kHz–1300 MHz

Frequency range
1 kHz–2 GHz

Modes

Analog modes
WFM, NFM, AM, USB, SSB · USB / LSBSingle Sideband transmits one sideband, usually with the carrier suppressed. USB is the upper and LSB the lower sideband relative to the carrier reference.Example & full explanation →, CW

Not documented — see detail page.
Transmit powerNot documented — see detail page.Not documented — see detail page.
Connections

Antenna connection
BNC, 50 Ω; maximum input 0 dBmdBm expresses an absolute power level relative to 1 milliwatt, combining the logarithmic dB scale with a fixed power reference.Example & full explanation →

Interfaces
USB Mini-B, microSD, earphone, external DC power

Antenna
SMA, 50 Ω

USB / current draw
USB 2.0 Type B; 185 mA excluding bias-T load

Power supply

Supply
BP-10 7.4 V / 2000 mAh; external input 6.5–10.5 V

USB / current draw
USB 2.0 Type B; 185 mA excluding bias-T load

Dimensions and weight

Dimensions, W × H × D
65 × 137 × 41 mm, with battery excluding projections

Weight
Approx. 420 g with battery, antenna and belt clip

Enclosure
Steel; 98 × 94 × 35 mm; 315 g

Protection and operating conditions

Protection / temperature
IPX5 with battery fitted; −10 to +50 °C

Not documented — see detail page.
Highlights
  • Automatic detection of DMR, NXDN, dPMR, P25 Phase 1, D-STAR, C4FM, Alinco EJ47U and D-CR.
  • TETRA reception in Direct Mode (DMO).
  • RAN, NAC, colour-code and time-slot filtering for the relevant digital formats.
  • Priority reception, frequency skip, level/noise and tone squelch.
  • Continuous reception from longwave to 2 GHz.
  • Switched low-pass, band-pass and high-pass preselection filters.
  • Separate rejection filters for mediumwave, FM broadcast and DAB.
  • Software-controlled bias-T supply at the antenna input.
Variants and sources

The collection also lists the newer 2200 mAh BP-10(A). These base specifications follow the manufacturer brochure with BP-10. The US retail version blocks cellular frequencies.

Full product dossier →		Full product dossier →

How to interpret the differences

BandwidthBandwidth is the width of a frequency range. A receiver filter limits the analysed range; the signal’s occupied bandwidth is a separate quantity.Example & full explanation →SDRIn a Software Defined Radio, software performs key signal-processing tasks such as filtering and demodulation. The analogue front end and converter still determine which signals can be processed.Example & full explanation →DMRDigital Mobile Radio is a family of digital radio standards. Amateur radio commonly uses DMR Tier II; channel configuration includes frequency, colour code, time slot and call destination.Example & full explanation →SimplexIn typical simplex voice operation, stations take turns transmitting and receiving on the same frequency. Only one station can speak intelligibly at a time.Example & full explanation →RepeaterA repeater receives signals and retransmits them. Many voice repeaters use different input and output frequencies; other stations are heard on the repeater output.Example & full explanation →

A wideband receiver and a handheld transceiver serve different purposes. A wider receive range does not automatically mean better sensitivity. Sensitivity depends on mode, measurement bandwidth and criterion, so this comparison does not create an overall ranking.

First check your required mode, then suitable antenna and accessory connections, and finally the power supply. A device’s transmit capability does not establish your personal permission to transmit.

From comparison to equipment

Open the full dossier. Its jump links take you straight to available guides and assigned accessories.

AOR AR-DV10 →SDRplay RSP1B →